Help Please - Advice Needed asap....
Moderators: User administrators, Moderators
Help Please - Advice Needed asap....
Please can someone help. We need a new thermostat for our van. We've found one on Ebay, but have no idea if it is the right one for our van. How do we tell? Can someone please tell me if this is the right one to get. Our van is a 1982 with a 1970cc (original) Aircooled engine. Here is the link for the thermostat on ebay:-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0298688071" onclick="window.open(this.href);return false;
A quick reply would be appreciated because there is only 22hrs left on the bidding.
BTW, is the van ok to drive while the old thermostat is broken, ie. the baffles are permanently open (stretched). I have been driving her since I got her, and obviously it has been broken since I got her.
Many thanks.
Jase
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0298688071" onclick="window.open(this.href);return false;
A quick reply would be appreciated because there is only 22hrs left on the bidding.
BTW, is the van ok to drive while the old thermostat is broken, ie. the baffles are permanently open (stretched). I have been driving her since I got her, and obviously it has been broken since I got her.
Many thanks.
Jase
-
- Registered user
- Posts: 938
- Joined: 13 Nov 2005, 09:35
- 80-90 Mem No: 1959
- Location: aberdare south wales
Re: Help Please - Advice Needed asap....
link dont work, but on an Aircooled motor the flaps go to failsafe mode of open fully, this will not harm your engine but it will take longer to warm up.
looking at his other parts i would suspect this is not the correct one as al the other kit is type 1 stuff
new thermostats are obsolete for these motors
second hand ones do turn up now and again.
looking at his other parts i would suspect this is not the correct one as al the other kit is type 1 stuff
new thermostats are obsolete for these motors
second hand ones do turn up now and again.
Last edited by jason k on 02 Mar 2009, 20:19, edited 1 time in total.
98 Westfalia James Cook
- sezicoolcat
- Registered user
- Posts: 586
- Joined: 24 Apr 2008, 16:42
- 80-90 Mem No: 5198
- Location: Chatham, Kent
- Contact:
Re: Help Please - Advice Needed asap....
You've mispelt ebay mate
If you've gotta go, you've gotta go. (Camping that is
)

Re: Help Please - Advice Needed asap....
That's weird, I copied/pasted the link straight from the address bar. Here it is again:-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0298688071" onclick="window.open(this.href);return false;
BTW, I apologise for any past/future misspellings, I am dyslexic, and I'm hopeless unless my darling wife is around.
Thanks for replying anyway.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0298688071" onclick="window.open(this.href);return false;
BTW, I apologise for any past/future misspellings, I am dyslexic, and I'm hopeless unless my darling wife is around.
Thanks for replying anyway.
-
- Registered user
- Posts: 938
- Joined: 13 Nov 2005, 09:35
- 80-90 Mem No: 1959
- Location: aberdare south wales
Re: Help Please - Advice Needed asap....
same has happened again!!!
still its the wrong one.
still its the wrong one.
98 Westfalia James Cook
- VWCamperfan
- Registered user
- Posts: 993
- Joined: 08 Jul 2007, 19:47
- 80-90 Mem No: 4000
- Location: Sheerness, Kent.
Re: Help Please - Advice Needed asap....
Mark.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
Re: Help Please - Advice Needed asap....
That is spooky, it's correct when I submit the message, but not when it posts. There's a gremlin in the works, or a glitch in the matrix!
Thanks for your help, and for replying so quickly. I won't bother with it then, but thanks for putting my mind at ease, re, still driving it.
Jase

Thanks for your help, and for replying so quickly. I won't bother with it then, but thanks for putting my mind at ease, re, still driving it.
Jase
- Nicola&Tony
- Registered user
- Posts: 2674
- Joined: 01 Nov 2006, 18:18
- 80-90 Mem No: 3095
- Location: Wallsend, Tyne & Wear
Re: Help Please - Advice Needed asap....
Jase&Sar wrote:That's weird, I copied/pasted the link straight from the address bar.
Wasn't your fault, there's something weird going on with ebay links at the moment, the letters seem to get jumbled up when they're copied and pasted.
Tony
Looking for: window apertures for side windows, at the back of the van
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
LT31; 1993; RHD; 2.4L petrol; high-top; diy camper project.
Re: Help Please - Advice Needed asap....
Cool, thanks for that Tony, I thought it was my dyslexia throwing a mental - panic over!


- Therunner
- Registered user
- Posts: 424
- Joined: 23 Nov 2005, 15:15
- 80-90 Mem No: 2735
- Location: Bognor Regis
Re: Help Please - Advice Needed asap....
on an Aircooled motor the flaps go to failsafe mode of open fully, this will not harm your engine but it will take longer to warm up.
The way I understand it, is that it's not good to leave the flaps in the failed open position long term.
The flaps are there, and stay closed to help your engine to reach it's operating temperature as quickly as possible, when it's at temperature the flaps open and cooling air is ducted over the oil cooler.
Leaving the flaps open slows this process down and causes more wear on the engine as it takes longer to warm the oil to the required temp/viscosity.
It won't kill your engine overnight, but it will slowly cause harm.
Melvin
Around the World in a Tea Daze
1980 1776CT Laurie engine
1992 Leyland Daf panel van camper
1978 Sherpa Autosleeper DeLuxe
Sprite Major Caravan
1980 1776CT Laurie engine

1992 Leyland Daf panel van camper
1978 Sherpa Autosleeper DeLuxe
Sprite Major Caravan
Re: Help Please - Advice Needed asap....
it wont hurt the engine at all. in the failed to safe mode you get extra cooling all the time which just means the engine will take longer to get hot. just make sure that the flaps the thermostat controls are actually present as some misguided folks remove them and that deffo can cause damage. 

LT owner and positively rattling around with the new found space
member 3339
member 3339
- Therunner
- Registered user
- Posts: 424
- Joined: 23 Nov 2005, 15:15
- 80-90 Mem No: 2735
- Location: Bognor Regis
Re: Help Please - Advice Needed asap....
I'm sticking with my original comment
http://www.vw-resource.com/vanes_thermostat.html" onclick="window.open(this.href);return false;
http://www.type2.com/library/cooling/thermost.htm" onclick="window.open(this.href);return false;
http://www.ratwell.com/technical/Thermostats.html" onclick="window.open(this.href);return false;
these are just the online references,
I've read the same in at least 2 books!
Melvin

http://www.vw-resource.com/vanes_thermostat.html" onclick="window.open(this.href);return false;
http://www.type2.com/library/cooling/thermost.htm" onclick="window.open(this.href);return false;
http://www.ratwell.com/technical/Thermostats.html" onclick="window.open(this.href);return false;
these are just the online references,
I've read the same in at least 2 books!
Melvin
Around the World in a Tea Daze
1980 1776CT Laurie engine
1992 Leyland Daf panel van camper
1978 Sherpa Autosleeper DeLuxe
Sprite Major Caravan
1980 1776CT Laurie engine

1992 Leyland Daf panel van camper
1978 Sherpa Autosleeper DeLuxe
Sprite Major Caravan
- lloyd
- Registered user
- Posts: 3550
- Joined: 14 Dec 2006, 08:56
- 80-90 Mem No: 3244
- Location: Torbay Syncronaut No. 110
- Contact:
Re: Help Please - Advice Needed asap....
ebay seller is selling a broken part! It's failed in open possition... filling up it's mount and all... unless it's over 100 degrees in the pic.
http://www.germansupply.com/xcart/skin1 ... ndgood.JPG" onclick="window.open(this.href);return false;
Bottom one is good cold one. Top is failed or hot thermostat.
Link to full article on type 1 and type 4 thermostats.. and how to modify a type 1 to work on type 4 engine
http://www.germansupply.com/xcart/custo ... _in_t4.tpl" onclick="window.open(this.href);return false;
Running without thermostat system working properly causes heating system to not work properly as well because engine doesn't reach operating temp like it should.... and on type 1 engines thermostat system forces more air to heater when thermostat is closed.
http://www.germansupply.com/xcart/skin1 ... ndgood.JPG" onclick="window.open(this.href);return false;
Bottom one is good cold one. Top is failed or hot thermostat.
Link to full article on type 1 and type 4 thermostats.. and how to modify a type 1 to work on type 4 engine
http://www.germansupply.com/xcart/custo ... _in_t4.tpl" onclick="window.open(this.href);return false;
Running without thermostat system working properly causes heating system to not work properly as well because engine doesn't reach operating temp like it should.... and on type 1 engines thermostat system forces more air to heater when thermostat is closed.

88 1.9 gassed w/Westy conversion & Reimo topper
MOBS
MOBS
Re: Help Please - Advice Needed asap....
Thanks to everyone for your replies. I don't know how long this thermostat has been broken, and how long the previous owner was driving in the state it's in.
I've checked out a couple of parts places, but can only find a new one for upto 1600cc engine, (mine is 1970cc).
Can anyone please suggest some sites where I might be able to find one. From what I've read, they're practically extinct, so how do I go about getting one?
Any help would be gratefully received.
Thanks again guys.
Jase
I've checked out a couple of parts places, but can only find a new one for upto 1600cc engine, (mine is 1970cc).
Can anyone please suggest some sites where I might be able to find one. From what I've read, they're practically extinct, so how do I go about getting one?
Any help would be gratefully received.
Thanks again guys.
Jase
- lloyd
- Registered user
- Posts: 3550
- Joined: 14 Dec 2006, 08:56
- 80-90 Mem No: 3244
- Location: Torbay Syncronaut No. 110
- Contact:
Re: Help Please - Advice Needed asap....
From my post above:
Read the instructions for how to modify and install a type 1 thermostat on a type 4 engine.Link to full article on type 1 and type 4 thermostats.. and how to modify a type 1 to work on type 4 engine
http://www.germansupply.com/xcart/custo ... _in_t4.tpl" onclick="window.open(this.href);return false;
88 1.9 gassed w/Westy conversion & Reimo topper
MOBS
MOBS