Newbie to the forum with a gear box problem

Post by **Stocky** » 21 Feb 2009, 11:06

I've seen the light and moved up to a t25 from a t2, unfortunately my new bus (autosleeper conversion) has a gearbox fault, 1st and 2nd work fine and the lever moves across the gate but won't select 3rd or 4th its just solid.
Iv'e been under the van and tried selecting these gears by manually moving the shaft, but its the same story here too.
So what i really want to know..... Is there anyone on here who's a gearbox guru who could rebuild mine??

Any help greatly appreciated in advance. Stocky Cumbria.

Post by **Nicola&Tony** » 21 Feb 2009, 11:23

Hello and welcome

You're at the right end of the country for getting this job done, get in touch with Aidan:
https://club8090.co.uk/forum/memberlist. ... file&u=151" onclick="window.open(this.href);return false;

Tony

Post by **Stocky** » 22 Feb 2009, 01:11

no, is the same at the box aswell. :O(

Post by **windysurfer** » 22 Feb 2009, 10:10

Then Aidan it is

http://www.aidantalbot.com/

Post by **Ian Hulley** » 22 Feb 2009, 18:45

Sounds like the linkage needs setting up correctly. Aidan's the man for the old gearboxes though

Ian.

Club 80-90 Forums

Newbie to the forum with a gear box problem

Newbie to the forum with a gear box problem

Re: Newbie to the forum with a gear box problem

Re: Newbie to the forum with a gear box problem

Re: Newbie to the forum with a gear box problem

Re: Newbie to the forum with a gear box problem