Is it a simple job to remove a bulkhead?
many thanks rob.......
bluk head removal
Moderators: User administrators, Moderators
-
syncrosimon
- Registered user
- Posts: 570
- Joined: 29 Jan 2007, 00:50
- 80-90 Mem No: 3784
- Location: Blackdown Hills of Devon and Somerset
- Contact:
Re: bluk head removal
Yes, the top half unscrews around the top edge, for the rest you will need a spot weld cutting drill, and then some paint and filler to make tidy.
Simon.
Simon.
1991 16" DJ (sold)
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
Re: bluk head removal
thanks...... 
-
syncrosimon
- Registered user
- Posts: 570
- Joined: 29 Jan 2007, 00:50
- 80-90 Mem No: 3784
- Location: Blackdown Hills of Devon and Somerset
- Contact:
Re: bluk head removal
There are a couple of welds in places, such as at the end of the strengthening bar which will need grinding off, also on the back of the battery box iirc.
1991 16" DJ (sold)
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400
2006 Subaru Outback 3.0R
2010 Yamaha Ténéré
2000 KTM LC400