brickinit wrote: multi position switch for the 1600 / 3000W "purged air" version
Don't know too much about Propex at the moment but it mentions the purged air versions have the ability to run the fan without heating to circulate air in hot conditions
Mine must be a 'purge' version. Not only can it run just as a fan if the weathers hot, but if it's run as a heater and the stat' switches the heater off 'cos the van's warm enough, a minute later it will start to run just the fan on it's own. Presumably to 'purge' the unit of built up heat as it stops after about 20 seconds or so.
intresting ive no idea what spec m9ien will be all i know is it will be terminated with a chocolate block and the 4 wires not 2 as i currently have/had
the rocker switch is only on or off(2 way) not 3 way
ok the story goes my oldpropex is kanckered currently with propex beign modernised to latest spec whiel talking to the man at propex i mentioned mine only had 2 wires conected to he told me should be 5 going to my thermostat
So i duly puechased 5 core wire but upon opening the thermostat have foudn it to be seemingly different to the "normal " ones
I have emailed propex man(awaiting a reply) just wondered if anyoen has this style and how i would wire it to a unit thats been moderinsed
Just trying to bring the original photos back, whilst searching for some Propex info.
Tony
Looking for: window apertures for side windows, at the back of the van
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!
There's a few previous threads about propex thermostats, put propex into the search facility and ask it to look in the technical forum or the campers one.
Tony
Looking for: window apertures for side windows, at the back of the van
T25; 1985; RHD; 1.9DG petrol / LPG; white Autosleeper high-top; Looking rusty again!