Got my 16" Doublecab on the road this week!

Syncro 4&4 Discussion and Q&A last answered over 2 years ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics (browse for Syncro links)

You can find further syncro specific information on the Syncronauts website.

Moderators: User administrators, Moderators

User avatar
Mick
Registered user
Posts: 108
Joined: 11 Oct 2005, 19:42
80-90 Mem No: 635
Location: Rotherham

Vindic Hood handles

Post by Mick »

H.Harold Sheffield 0114 2372 4724/273
sells the closest that I have seen.
Image
Image
Image
I bought one for the princely sum of £12.40 today to check them out.
The handle and base are smoooothed out, a little slimmer/smaller but the locating holes are identical, the square rod the same size - just needs threading and cutting to your required length, probably what Vindic did.
2 keys, they will rekey all 3 to the one key if you like - like ? - a must !
They were unsure re. mail order but I could collect for you, perhaps post, meet at a meet or 80-90 courier service or summat.
Catch you later.
:wink:
A bugger to put the pictures on and then they are always small ??!
:oops:
Even the links show small pics, muchos only allows small pics to be uploaded ? What to do ?
:cry:
:D :D :D :D :D
Oooh thanks missusjen
Last edited by Mick on 08 Nov 2005, 17:03, edited 2 times in total.
Mick
Club80-90 Member No 635
Syncronaut 21

missusjen
Registered user
Posts: 1522
Joined: 09 Oct 2005, 18:54
80-90 Mem No: 0
Location: a million miles from here, somewhere more familar
Contact:

Post by missusjen »

You are linking to the thumbnail views - click on the thumbnail image, and it'll be bigger, then link to that........ :D

Image
Image

"HEY, LOOK AT MY CAR"


I bid you farewell.......for now.......

missusjen
Registered user
Posts: 1522
Joined: 09 Oct 2005, 18:54
80-90 Mem No: 0
Location: a million miles from here, somewhere more familar
Contact:

Post by missusjen »

Image
Image
Image

"HEY, LOOK AT MY CAR"


I bid you farewell.......for now.......

Cate
Registered user
Posts: 2065
Joined: 10 Oct 2005, 12:43
80-90 Mem No: 1024
Location: Here & there on the Isle of Wight. 80-90 1024, sync 22, Goon.

Post by Cate »

They look perfect Mick. For that price and keyed to the same key it seems like a must!
Me!
..and here's the twist...I don't exist....

sixsprings
Registered user
Posts: 785
Joined: 11 Oct 2005, 13:14
80-90 Mem No: 15083
Location: lincoln

Re: Got my 16" Doublecab on the road this week!

Post by sixsprings »

Image

that's great :D .
you bought a 17 yr old thingy for the same reason(s) that we all do..because we love them.
i'll have to start saving again, won't i? :lol:

i hope you lot don't mind me posting in here? :wink:

Diamond Hell
Registered user
Posts: 961
Joined: 09 Oct 2005, 17:27
80-90 Mem No: 830

Post by Diamond Hell »

BACK OFF Tischer boy!

What do you want? A single cab Syncro to go under your brick?
Diamond Hell
Still Syncro, just much fasterer

steffanstringer
Registered user
Posts: 6
Joined: 11 Oct 2005, 16:25
80-90 Mem No: 2544
Location: Farnham, Syncronaut 74
Contact:

Re: Vindic Hood handles

Post by steffanstringer »

Mick wrote:H.Harold Sheffield 0114 2372 4724/273
sells the closest that I have seen.

I bought one for the princely sum of £12.40 today to check them out.
The handle and base are smoooothed out, a little slimmer/smaller but the locating holes are identical, the square rod the same size - just needs threading and cutting to your required length, probably what Vindic did.
2 keys, they will rekey all 3 to the one key if you like - like ? - a must !
They were unsure re. mail order but I could collect for you, perhaps post, meet at a meet or 80-90 courier service or summat.
Catch you lat

Mick - that's just what I want as I have no reply from Vindic at the moment. If you are happy to act as the 'retailer' I would like to order three (the ones on the right in the photo) with the same key. It would be just perfect if they would thread them and supply a nut (at extra charge of course), but if they are unwilling to do this I'll take them as is. I can pay you upfront by cheque or bank transfer and include cover for postage. Let me know if that's too much trouble and I will deal with them directly. Please PM me if you want to continue this transaction off the board.

Thanks!

Steffan
1988 Silver 16" Syncro Doublecab 2.1 DJ
1985 White 14" Syncro Westfalia Joker 1.9 DG/LPG

User avatar
Mick
Registered user
Posts: 108
Joined: 11 Oct 2005, 19:42
80-90 Mem No: 635
Location: Rotherham

Re: Vindic Hood handles

Post by Mick »

Hi. just hang on. I want to get this one threaded and fitted - prob by this weekend and I'll get back to you. My rear door is ready to fit tomorrow and I'll fit the new handle, take some pics.
Reckon that I'll change the other 2 later.
H.Harold had 14 in stock-they are locksmiths and will not thread the rods.
My email is in my profile
:wink:
Later -
To be honest, it was easier to break the rod out of the old handle to re-use.
Image
It's almost a perfect fit in the new handle, shave the top and trim the corners so the holes aligne as nicely as the new rod it replaces.
Image
My picture doesn't do it justice.
:D
Last edited by Mick on 11 Nov 2005, 14:08, edited 1 time in total.
Mick
Club80-90 Member No 635
Syncronaut 21

User avatar
HarryMann
Admin/Mod
Posts: 9610
Joined: 30 Sep 2005, 11:40
80-90 Mem No: 379
Location: Herts, UK

Post by HarryMann »

H.Harold had 14 in stock-they are locksmiths and will not thread the rods

Well chaps, if locksmiths can't even thread a rod these days, a £5ver on Ebay will get you a set of cheap carbon steel taps & dies, and if it's a square rod, to some extent, easier than a round one. Just have to choose the right thread!

The 80-90 Tech Wikipedia Your 1st port of call :idea

Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1

steffanstringer
Registered user
Posts: 6
Joined: 11 Oct 2005, 16:25
80-90 Mem No: 2544
Location: Farnham, Syncronaut 74
Contact:

Need more bits for the Vindic hard-top and Doka

Post by steffanstringer »

Hi Folks, I'm on the hunt for parts:-

my Vindic hard-top has rusty hinges (rear door only):-

Image

Need another battery cover for the driver's seat (LHD):-

Image

and lastly I think there is a step that supposed to go here on the taildrop...

Image.

Also anybody got any truck mirrors in good shape they want to sell?

Cheers

Steffan
1988 Silver 16" Syncro Doublecab 2.1 DJ
1985 White 14" Syncro Westfalia Joker 1.9 DG/LPG

User avatar
Mick
Registered user
Posts: 108
Joined: 11 Oct 2005, 19:42
80-90 Mem No: 635
Location: Rotherham

Re: Need more bits for the Vindic hard-top and Doka

Post by Mick »

Hi Steffan.
Ring Owen 07802 378377.
Those hinges are different to mine. Mine are hung from the underside of the hood.
Image
Image
Perhaps Cate can comment on hers.
:wink:
Just found these Tristar pics with a hood like ours, rear hinges more like yours.
Image[/img]
Image
As said, ring Owen.
Mick
Club80-90 Member No 635
Syncronaut 21

User avatar
Mick
Registered user
Posts: 108
Joined: 11 Oct 2005, 19:42
80-90 Mem No: 635
Location: Rotherham

Handles posted

Post by Mick »

YGM.
Don't know why but I like to type that.
:oops:
Mick
Club80-90 Member No 635
Syncronaut 21

Diamond Hell
Registered user
Posts: 961
Joined: 09 Oct 2005, 17:27
80-90 Mem No: 830

Post by Diamond Hell »

Shows you're down with the kidz, Mick :wink: :lol:
Diamond Hell
Still Syncro, just much fasterer

Cate
Registered user
Posts: 2065
Joined: 10 Oct 2005, 12:43
80-90 Mem No: 1024
Location: Here & there on the Isle of Wight. 80-90 1024, sync 22, Goon.

Post by Cate »

Steffan, the hinges you show are the same as mine, how can I help?
If anyone has a couple of spare rods that are used to close the lids I would be grateful.....
Me!
..and here's the twist...I don't exist....

steffanstringer
Registered user
Posts: 6
Joined: 11 Oct 2005, 16:25
80-90 Mem No: 2544
Location: Farnham, Syncronaut 74
Contact:

Post by steffanstringer »

Wow - nice red Tristar!!!!!

Cate - thanks for the offer, as per Mick's suggestion I will be calling Owen when I am back in the UK - unless you know where I can get some replacement hinges.

Failing that I'll be taking them off and Hammeriting them.

I have a missing rod on the rear door too, but so far it closes fairly securely without it. Again - if you find a source let me know and I'll do likewise.

Thanks

Steffan
1988 Silver 16" Syncro Doublecab 2.1 DJ
1985 White 14" Syncro Westfalia Joker 1.9 DG/LPG

Locked