coolant hoses on me 1.9 conversion

Post by **oldiguana** » 24 May 2006, 15:27

eyup ducks,ive already posted i topic on here which was extremely helpfull,so here goes with the next......when i bought me van the 1.6 n/a diesbag was in a bread crate behind the passenger seat,so im making a lot of it up as i go along but im now having trouble with the coolant hoses,does anybody have a pic or a diagram of where all the hoses go to on the engine..for example there are three hoses on the waterpump,bottom hose goes to bottom hose on the rad,thats all i know also,the two radiator hose unions are there but which is which????,there are two unions on the oil cooler,two pipes going to the cylinder head directly above oil cooler,unbelevably confused,has anybody got any ideas???????

Post by **Louey** » 24 May 2006, 20:11

I'll sort some photos out tomorrow or later, the photos are on the old pc which isn't cranked up at the moment

Post by **Louey** » 25 May 2006, 12:47

hope these piccies help

Post by **oldiguana** » 27 May 2006, 09:27

eyup ducks,those pics were absolute mustard,sussed it in 5 minutes after 5 hours of head scratching,thanks very much,most appreciated

Post by **Louey** » 27 May 2006, 09:53