import vans - hook ups

Post by **ol bluey** » 21 Mar 2006, 12:19

does anyone know what the voltage is a european van runs off?

just trying to work out if i can get away with simply swapping plugs inside over or if the voltage bit itself needs to be changed...wherever it is!!

Post by **Bowton Lad** » 21 Mar 2006, 13:10

I don't know about the actual vans but given the fact that we in the UK
reduced our electricity from 240v down to 230v to be inline with the rest of the EU (alright France & Germany) then I would suggest that you would be ok to change the plugs on the hook-up lead. You should also be able to
fit those horrible 2 pin plugs on your electrical appliances.
You really need to speak to a proper electrickery person.

Post by **T2Andy** » 21 Mar 2006, 16:49

220/230v I just use the plug in adaptors that turn the interior two pin to the UK 3 pin. Did the same with me old 77 Westy as well. No problems.

Post by **ol bluey** » 21 Mar 2006, 18:17

might just rewire the plugs when it arives then

if it goes bang i'll blame you lot

Post by **hagzo** » 22 Mar 2006, 12:28

T2Andy wrote:220/230v I just use the plug in adaptors that turn the interior two pin to the UK 3 pin. Did the same with me old 77 Westy as well. No problems.

I tried to connect a 2 pin to 3 pin travel plug to the existing euro outlet but it wouldn't fit seems the 2 pins are too far up the outlet.

Do i need a different connector?

Ta

owlets · Post by **owlets** » 22 Mar 2006, 19:11

I've got a 83 Westy german import and the hook up runs fine. I've also just plugged in the usual 2 pin travel adaptor into the plug socket with no issues.

The only problem I had was the trip, it kept tripping after about 5-6 hoursd use. Had that changed and no problems now.............touch wood

Post by **T2Andy** » 23 Mar 2006, 16:43

hagzo wrote:
T2Andy wrote:220/230v I just use the plug in adaptors that turn the interior two pin to the UK 3 pin. Did the same with me old 77 Westy as well. No problems.

I tried to connect a 2 pin to 3 pin travel plug to the existing euro outlet but it wouldn't fit seems the 2 pins are too far up the outlet.

Do i need a different connector?

Ta

I just use the simple basic adaptor, it sits flush with the euro socket when plugged in costs about 99p

Post by **DiscoDave** » 23 Mar 2006, 20:27

westy do a socket to replace the euro one with a uk one! torz got one a df! as for the wires, they will be fine. you may have problems with a zig tyoe unit if you use it at the wrong volatge! have a gander at it it will say it's voltage range! this will tell you if it's ok!!

Post by **ol bluey** » 24 Mar 2006, 17:12

DiscoDave wrote:westy do a socket to replace the euro one with a uk one! torz got one a df!

is there a website at all for them?

Club 80-90 Forums

import vans - hook ups

import vans - hook ups

EUROPEAN VANS - HOOK UP