2.1 exhaust modification

Post by **Aidan** » 28 Oct 2005, 12:33

fit a rev counter perhaps and enjoy the quiet

Post by **toomanytoys** » 29 Oct 2005, 11:53

It will be straight through... think about it.. how loud will that be!!!!
Think you would have to fit a primary silencer with a bit of baffleing in it as well..

Post by **Dai** » 29 Oct 2005, 23:38

Ive fitted a motorcycle race can to my 2.1 with no flat spots or running problems,seemed loud to begin with but the neighbours are used to it now!!!!! and since i fitted colway MT tires i cant hear the pipe for the noise from the tyres

Post by **T'Onion** » 30 Oct 2005, 10:31

I have heard Dai's van and it sound well sweet ... grrrrrrrr

Post by **Dai** » 30 Oct 2005, 23:15

Hi Mark, thanks for that,ive only heard it from inside the van ,it makes me smile every time i drive it

and it seems to have more power

Post by **T'Onion** » 31 Oct 2005, 07:53

we heard you growling up the last hill before the strines ... nice ...

what can/s did you use .... i have a couple of gpz500s cans in the shed doing nowt

Post by **Mocki** » 31 Oct 2005, 09:00

T'Onion wrote: what can/s did you use .... i have a couple in the shed doing nowt

"Que" onions bus with bean cans sticking outa tha back....

Post by **T'Onion** » 31 Oct 2005, 09:16

beans cans and gassed up on beans juice .. parrrfff

nowt new there then

Post by **Dai** » 31 Oct 2005, 19:32

Its an aluminium "ART" race can off a Suzuki TL1000S

just needed 3 holes drilling and tapping and it bolted tight up under the rear valance.the exhaust hanger took a little more work

GpZ 500 ones should do the trick tho