This is what I found so far: Quote..
Most of the worlds leading car manufacturers are now demanding silver technology for their first fit battery. Most European vehicles from 2000 have been fitted with SCS charging systems to take care of the excessive demands placed on today's batteries, the SCS charges batteries on the vehicle at 15.2 volts, this is much higher than a conventional system and therefore will only work with batteries manufactured with Silver Technology.
Silver Technology gives the battery a far higher tolerance and acceptance of this higher charge rate, by fitting a conventional battery the acid would turn black, a high loss of electrolyte and the risk of explosion would occur. A conventional battery would NOT last the period of the guarantee.
So to my point By this we can see putting a tradional lead/acid battery in a vehicle with a modern SCS charging system would be a complete NO NO but what about the oposite way around ie: a battery designed to be charged at 15.2 volts fitted with a charging circuit that puts out 13.8-14.2 volts. I know that it will be safe...no damage will occur but will the battery perform optimally? get full charged? I ask this because a traditional charge circuit reduces alternator output but reducing the power to the stator windings when it senses higher fully charged battery state, so how is that going to work with a Silver-Calcium type?
Anyone out there have some PROPER info? JUST INTERESTED........

Martin