Thin bits of metal and bright blue light.
Moderators: User administrators , Moderators
Tug
Registered user
Posts: 82 Joined: 17 May 2008, 13:02
Post
by Tug » 29 Oct 2008, 21:02
Well my paint has come....Camper is nearly ready to be rollered....Just a slight issue with the side door after I re skinned the lower half along with a new inner panel....Seems to be touching on the back corner now...strange but their you go...will sort it.
Any tips on rollering.....Bright yellow van here we go
R0B
Moderator
Posts: 19496 Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire
Post
by R0B » 29 Oct 2008, 21:33
you are having a larf arnt you.theres a 37 page thread about it at the top of this page...
https://club8090.co.uk/forum/viewtopic.php?t=18751
Any tips on rollering.
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
Tug
Registered user
Posts: 82 Joined: 17 May 2008, 13:02
Post
by Tug » 29 Oct 2008, 21:53
I was actually
And Im a dab hand at spraying.....thing is me compressors blucked.....so rollering it is...
R0B
Moderator
Posts: 19496 Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire
Post
by R0B » 29 Oct 2008, 22:00
if you filled in your profile letting us know where you are.someone might lend you a compressor.you could borrow mine if you lived local to me..
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
Tug
Registered user
Posts: 82 Joined: 17 May 2008, 13:02
Post
by Tug » 29 Oct 2008, 22:07
I am in Worcester. Rollering it will be fine. Never rollered before but fingers crossed it will come out fine.
Spent a fortune on panels so fingers crossed it should come out god.
Glenn
R0B
Moderator
Posts: 19496 Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire
Post
by R0B » 29 Oct 2008, 22:19
it should come out god
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
Tug
Registered user
Posts: 82 Joined: 17 May 2008, 13:02
Post
by Tug » 29 Oct 2008, 22:32