bleeder valve
Moderators: User administrators, Moderators
-
citybluevw
- Registered user
- Posts: 0
- Joined: 08 Oct 2008, 15:15
- 80-90 Mem No: 6018
- Location: rotherham
bleeder valve
can anyone tell me how to get hold of a bleeder valve from a 1.9 t25 1985, or if theres any way of fixing it as the small front pipe has broke off. the part no. 025121082
cityblue6018
-
Fritz
- Registered user
- Posts: 1628
- Joined: 17 Jul 2006, 22:51
- 80-90 Mem No: 380
- Location: Ormskirk, Lancashire
If it is fixable the way I would do it is to find a small length of brake pipe,
drill both the housing and the bit that has broken off (if possible) then slide the metal pipe into both broken parts of the housing and simply use Araldite as the adhesive to hold it in place...
Or find a second hand one if you can't get one from VW.
Regards
Fritz,,,,,
Smaller diameter brass pipe can be found at any good hard wear stores/hobby shop if brake pipe is found to be too big.
drill both the housing and the bit that has broken off (if possible) then slide the metal pipe into both broken parts of the housing and simply use Araldite as the adhesive to hold it in place...
Or find a second hand one if you can't get one from VW.
Regards
Fritz,,,,,
Smaller diameter brass pipe can be found at any good hard wear stores/hobby shop if brake pipe is found to be too big.
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
Driving in my Camper,
With a Surf and Paisley wrap on both sides....