has an one done this
The camper has a solid high roof so i need to source a stowable type hamoc and a way to neatly fit it any ideas
brian
TO FIT EXRTA BUNK TO VILLA 3
Moderators: User administrators, Moderators
TO FIT EXRTA BUNK TO VILLA 3
I am trying to add a exrta bunk into a1990 hodsworth villa 3 2 bed model
has an one done this
The camper has a solid high roof so i need to source a stowable type hamoc and a way to neatly fit it any ideas
brian
has an one done this
The camper has a solid high roof so i need to source a stowable type hamoc and a way to neatly fit it any ideas
brian
-
Tex Ritter
- Registered user
- Posts: 436
- Joined: 10 Oct 2005, 09:14
- 80-90 Mem No: 1057
- Location: Northumberland.
There is a bit in the Wiki under bunks.
You can fit a bunk across the cab area above the seats, use the door pillars for the cups, Justkampers do a kit.
http://shop.justkampers.com/advanced_se ... s=Bunk+bed
Older type caravans used to have removable bunks consisting of 4 cups 2 poles through canvas for the mattress part (looked a bit like a stretcher when fitted up).
Tex R
You can fit a bunk across the cab area above the seats, use the door pillars for the cups, Justkampers do a kit.
http://shop.justkampers.com/advanced_se ... s=Bunk+bed
Older type caravans used to have removable bunks consisting of 4 cups 2 poles through canvas for the mattress part (looked a bit like a stretcher when fitted up).
Tex R
If you never have a route planned ...how can you ever be lost?
-
lloyd
- Registered user
- Posts: 3550
- Joined: 14 Dec 2006, 08:56
- 80-90 Mem No: 3244
- Location: Torbay Syncronaut No. 110
- Contact:
Si is trying to get some made to sell on Brickwerks Don't know how it's coming along.
http://www.brick-yard.co.uk/forum/forum ... 879#203879
Link to thread here on them with lots of other links to pics, etc.
https://club8090.co.uk/forum/viewtopic.php?t=35471
I used these front cots in my split and bay campers when kids were small. Most aftermarket ones have canvas too loose. Mine were original westy and canvas was stretched tight like old military cot ones.
Hope this helps.
http://www.brick-yard.co.uk/forum/forum ... 879#203879
Link to thread here on them with lots of other links to pics, etc.
https://club8090.co.uk/forum/viewtopic.php?t=35471
I used these front cots in my split and bay campers when kids were small. Most aftermarket ones have canvas too loose. Mine were original westy and canvas was stretched tight like old military cot ones.
Hope this helps.
88 1.9 gassed w/Westy conversion & Reimo topper
MOBS
MOBS
I'm in the middle of restoring a Holdsworth Vision 1989. Mine had the extra berths in the high top.
I didn't require them so pulled the whole lot out. The Villa must be similar.
I had two strips of 1" Ally angle iron down each side of the high top shelf screwed down with a couple of self tappers, and a pine construction slatted bed that slid in to these (similar construction to a gate!). The bed came in three main sections with a ladder into the kitchen area.
I can take pictures and measurements if you want.
I didn't require them so pulled the whole lot out. The Villa must be similar.
I had two strips of 1" Ally angle iron down each side of the high top shelf screwed down with a couple of self tappers, and a pine construction slatted bed that slid in to these (similar construction to a gate!). The bed came in three main sections with a ladder into the kitchen area.
I can take pictures and measurements if you want.