Vaporiser water pipe location - 2.1
Moderators: User administrators, Moderators
Vaporiser water pipe location - 2.1
where are the inlet/outlet for water feeds taken from/to on a 2.1 ? pics would be nice! although my installer is very competant/experienced this is his first transporter!
- AngeloEvs
- Registered user
- Posts: 1345
- Joined: 22 Nov 2007, 19:22
- 80-90 Mem No: 4709
- Location: Upwell, Norfolk
I initially looped mine into the expansion tank as it uses the identical hose size, negligible loss of coolant (prime the vaporiser pipes with AF/water mix), and covered 4000 miles on lpg without any probs whatsover. The only problem I could see would be large loss of coolant and the vapouriser would freeze, that would be the least of your problems however IMHO. However, I recently changed it to the 'orthodox' method on 1.9's using the carb water heating circuit but best to see how others with 2.1's have it plumbed. As I said, no probs whatsover when I plumbed into the expansion tank but someone may point out a reason not to.
- Ian Hulley
- Registered user
- Posts: 12659
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
Re: Vaporiser water pipe location - 2.1
ELVIS wrote:where are the inlet/outlet for water feeds taken from/to on a 2.1 ? pics would be nice! although my installer is very competant/experienced this is his first transporter!
If he doesn't know that he wouldn't touching my kin Bus !!
I hope all goes well, and you're both well insured.
Ian.
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure