T25 tacho and the pcb

Post by **Sven** » 13 Feb 2006, 12:18

like it says, to fit the tacho do i need the relevant printed circut board??
The tacho has a plug in the back with 4 pins and i cant seem to find the male adapter behind the dash to connect into this. The standard board looks like it might accept the fuel and temp as they are fitted 3 oclock and 8 oclock on the tacho whereas the standard board they are at 12 and 6 oclock accordingly.
any suggestions accepted please
Sven

Post by **Sven** » 13 Feb 2006, 18:12

Someone's gotta know!!!!!!!!!!!!!!!!
S

Post by **Aidan** » 13 Feb 2006, 19:40

Yes you need the correct circuit board mate
part number 251 919 059 K £60 + vat from VW
I found the exhasut straps in the end, did you still need them ?

Post by **redstar** » 13 Feb 2006, 19:53

mr sven..
for that money i would pop it apart if i were you...
if 4 connections,there will
be positive
neg
illumination
coil pick up

but the £60 is which way???

Post by **Sven** » 14 Feb 2006, 10:49

Thanks for the reply guys.
Aiden, i managed to get a few straps made.....might put a post up to see if anyone else needs any......the guy can knock them out quite cheaply.
Sven

Post by **NOT ANOTHER LEAK** » 14 Feb 2006, 20:39

any ideas on price sven,looking at mine dont think theres much life left on them

Post by **Sven** » 14 Feb 2006, 20:44

A tenner a pair richard.....think i'll get a coupla sets knocked up
Sven

Post by **NOT ANOTHER LEAK** » 14 Feb 2006, 20:52

sounds good.let me know and i`ll pop round,
got all my bits for the interior now so started to get going on that

Post by **Grun** » 15 Feb 2006, 13:43

Sven,
I would love a pair of exhaust straps, if we are talking about those stainless steel ones that were on a link to eBay, IIRC. £10 a pair PLUS post and packing. Give me your all in price I'm a prompt payer!!
Mike

Post by **Sven** » 16 Feb 2006, 21:41

No Grun theyre not the stainless ones that were on ebay...dont know who that was. These are steel ones...personally stainless straps are a bit of overkill.....steel ones should last for years anyway.
they're for the watercooled engines by the way. If still interested mail me on svenlivesey@hotmail.com Cheers

Post by **Grun** » 17 Feb 2006, 12:58

Thanks Sven,
It was Zippy who advertised on eBay. As my next exhaust is planned to be stainless, I thought straps in the same material would be a nice touch.
Mike

Club 80-90 Forums

T25 tacho and the pcb

T25 tacho and the pcb

Re: T25 tacho and the pcb

Re: T25 tacho and the pcb