syncro mrroris

Post by **hercules** » 30 Jun 2008, 21:10

Hi iv got a sit of LT mrror arm on me van but the bottom bit does fit the holes do the still sell this bit of the arm or no were i could get one to put on mine

here a picture of the bit i need
[IMG:150:148]http://i192.photobucket.com/albums/z100 ... rror-3.jpg[/img]
thank
chris

Post by **lloyd** » 30 Jun 2008, 22:22

VW if they are not all sold

Post by **Ye Olde Syncrospares** » 01 Jul 2008, 08:01

3 months too late

Post by **lloyd** » 01 Jul 2008, 08:24

Guess that means filling existing mounting holes and re-drilling with T3 spacing. Might work, but won't be easy. Maybe fill existing holes with epoxy metal filler first.

Post by **Aidan** » 01 Jul 2008, 17:49

drill out the reinforcingplate and fit a rivnut M5 is AndyMcC top tip

Post by **akira28** » 02 Jul 2008, 13:46

Or another option is to make an adapter plate (6mm thick) that bolts onto the door with 1 M8 countersunk. Then 1 bolt screws into the plate and the other through into the door. Did this with the simple pivot pre face lift mounts though.

Club 80-90 Forums

syncro mrroris

syncro mrroris

RE: syncro mrroris