Help identifying missing tinware

Post by **dubdaze** » 17 Jun 2008, 18:23

Hi,

I have just purchased a 1.6 Aircooled T25 and there seems to be quite alot of tin missing. Can anyone help me identify the pieces I am missing?

[IMG:547:800]http://i13.photobucket.com/albums/a252/ ... T25/CT.png[/img]

Inside the engine bay...

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1331.jpg[/img]

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1330.jpg[/img]

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1332.jpg[/img]

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1333.jpg[/img]

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1334.jpg[/img]

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1335.jpg[/img]

[IMG:640:480]http://i13.photobucket.com/albums/a252/ ... G_1336.jpg[/img]

I think I am missing 12, 15 and maybe 10 (does this go over the oil cooler?). I know I am also missing 7 and 8, but is there anything else?

Also, where is the best place to get this tin, and I also need the air filter / pipes etc...

Cheers for any help.

Post by **funbus1** » 17 Jun 2008, 19:20

Type tinware into search, at top of page. loads of stuff in there. Rick

Post by **jason k** » 17 Jun 2008, 19:37

dont drive it like that you will kill it.

Post by **dubdaze** » 17 Jun 2008, 19:41

jason k wrote:dont drive it like that you will kill it.

Don't worry, had too many Aircooled's to know the value of all of the tin, trouble is this is my first T25, so am having trouble knowing what is missing and where to get it

Post by **Therunner** » 18 Jun 2008, 09:26

Hi

Having bought a couple of replacement 1.6CT's for our air cooled, we do have at least some of the bit's you need

It's a bit tatty, but I'll have a rummage and get back to you.

Melvin

Post by **Therunner** » 18 Jun 2008, 10:03

At least you still have the cooling flaps, - of the original and 2 replacement engines that we bought, only one still had these!

Melvin

Post by **dubdaze** » 18 Jun 2008, 10:12

Therunner wrote:Hi

Having bought a couple of replacement 1.6CT's for our air cooled, we do have at least some of the bit's you need It's a bit tatty, but I'll have a rummage and get back to you.

Melvin

That would be great! Thank you.

Post by **Therunner** » 18 Jun 2008, 15:11

hi, these are some of the bits he's got off one of the engines,
don't know if he's got anymore, he'll have to reply this evening when
he gets home from work, basicly if you want them you can have them for nowt & either collect or pay postage,.
they need a good clean, don't know if he intends to do that before he
sends them or not,.

sorry none of our engines came with a filter so can't help with that

[IMG:640:480]http://i191.photobucket.com/albums/z44/ ... inware.jpg[/img]

Post by **richnewton** » 18 Jun 2008, 15:44

I might have the air filter assembly, will double check. where abouts are you?

also you'll need an engine seal if you don't already have one?

http://shop.justkampers.com/product_inf ... s_id/12373

Post by **Therunner** » 18 Jun 2008, 22:00

It looks as if you're also missing 1 (sits under 15, above the exhaust silencer), 2 (fits under 10 and Yes, 10 partially covers the oil cooler) and 5 which sits in the little corner opposite the dizzy).

As you can see, the condition isn't great, but you're welcome to them, can post or you can collect if you're near us. PM if you want.

also you'll need an engine seal if you don't already have one?

Also got one of these somewhere, in the same oily condition as the rest tho I'm afraid

Melvin

PS; Still trying to get 7 and 8 off, one stuborn bolt on each!