Floor based (inset) - Table Foot

Post by **Titus A Duxass** » 27 May 2008, 14:13

Where do I get one of them there metal foots that you mount the table in?
I mean the one that is inset into the floor of the bus.

I've searched for "metal foot" "table foot", no joy so far.

Post by **Willoughby** » 27 May 2008, 15:06

Hi

http://shop.justkampers.com/product_inf ... b4038d0edc

Should do the job

K

Post by **Titus A Duxass** » 27 May 2008, 15:10

MurkyBuckets!

Post by **Titus A Duxass** » 06 Jun 2008, 07:20

Okay, I have an alloy table foot. Actually I don't have in my mitts yet.

I couldn't find an alloy one over here, no more Reimo ones to be had.

But JustKampers came to the rescue.

Has anyone got any fitting tips?

What size hole or holes,
How did you attach it firmly,
Positioning, whereabouts (yes, I know - on the floor).
Is the hole drilled so that the foot contacts with the metal floor pan?

Etc, etc.

Donkeyshite.

Post by **ermie571** » 06 Jun 2008, 15:06

ours was drilled so that the recess went though the floor (wood and metal beneath) and the lip screwd into the floor.

how do I know......coz when it went in for welding after interior stripped out , the welder asked hubby if he wanted the holes sorting in the floor pan...hubby said yes....van came back with hole neatly welded up...

result, one table, leg and mount in the garage..... not too bothered as I found it terribly inflexible, and more often than not in the "wrong" position!

Em
x

Post by **Titus A Duxass** » 07 Jun 2008, 06:24

Cheers Em,

not too bothered as I found it terribly inflexible, and more often than not in the "wrong" position!

- Anybody want to buy a foot?