Weber 34 ICT linkage

Post by **dekker** » 04 Jun 2008, 18:22

Hi, I'm wanting to fit some Weber 34 ICTs to my CT engine. I know that Type 1 manifolds will fit but could somebody tell me which linkage kit I'll need? Had a look at a Type 1 linkage but cable pull is above the linkage and I need below. Will Type 3 or Type 4 linkage fit?

Cheers, D.

Post by **toomanytoys** » 04 Jun 2008, 18:34

is it stock and no freshly rebuilt??

I'll blow up in a fortnight.......

Post by **dekker** » 05 Jun 2008, 06:39

Not stock, its a 1776 and is freshly rebuilt. Wouldn't be too shocked if it blew up quick as its the first Aircooled i've rebuilt, way more bits than the mini and ford engines I've done before!

Post by **toomanytoys** » 05 Jun 2008, 07:29

It'll last a month then

Post by **dekker** » 05 Jun 2008, 22:49

Got a horrible feeling you might be right.
Had loads of bother being supplied incorrect parts, and then to really rub it in a blackbird nested in the vans engine bay whilst the engine was out. Lost another month or so as made the mistake of telling the kids and didn't have the heart to throw them out.

Post by **toomanytoys** » 05 Jun 2008, 23:05

Nah itl be right.. if youve done other engines and used quality parts and made everything fit correctly, oh and used a good lube to assemble with... Prime the oil pump (back fill down the oil pressure switch on the oil cooler)

Post by **dekker** » 07 Jun 2008, 12:29

Cheers, I'll do that with the oil. Useful tip that.