ok. 12v din socket on control panel

Anonymous · Post by **Anonymous** » 01 Jun 2008, 12:03

The din type 12v socket on our autosleeper control panel has stopped working. Fuse is ok, there is 12v on the back of it but nothing coming out. Is it knacked?? Im assuming if there is 12v on the back then it should be fine??

Post by **kevtherev** » 01 Jun 2008, 14:07

is it grounded ok?

is the plug faulty?

Anonymous · Post by **Anonymous** » 01 Jun 2008, 14:12

I have put a meter on the rear connections behind the control panel and its fine. Have tried to test from the front but I dont get a reading.

Post by **kevtherev** » 01 Jun 2008, 14:14

clean the connectors mate and try again

Anonymous · Post by **Anonymous** » 01 Jun 2008, 14:24

will give it a bash

Thanks