Holdsworth Variety Zig Question...

Post by **GBHgpJON** » 30 May 2008, 21:35

Basically theres a big hole next to the water gauge...I guess this is where the Zig unit should be

But no wiring behind

To connect it.....Bummer!!

Any idea which zig unit was fitted originally???
Obviously thats the easy bit.......
More questions to follow......

Post by **Mad Mans SiS** » 30 May 2008, 22:25

any pics

Post by **GBHgpJON** » 31 May 2008, 14:02

Big Hole.....Any ideas wot should go there??? Zig perhaps???

[IMG:600:450]http://i18.photobucket.com/albums/b128/ ... CN4959.jpg[/img]

Would this be the split charge relay.........

[IMG:600:450]http://i18.photobucket.com/albums/b128/ ... CN4955.jpg[/img]

Havn't found the extra fuseboard yet....there is some extra fuses tagged onto the relay board above the main fuseboard, with a grey relay connected to them[see pic below]
Would this be anything to do with it?
Or are they factory???
[IMG:600:450]http://i18.photobucket.com/albums/b128/ ... CN4957.jpg[/img]
Cheers....

E D I T: Did abit of tracing wires etc.....turns out the extra fuses are the leisure ones....only two, ones the lighting, aint worked out what the other one does yet!

Post by **gti mad man** » 31 May 2008, 21:08

ok that hole def isnt a zig unit ! a zig unit is about 10" by 9" that looks like a regular mains house 240v single socket.

That relay looks very much liek a electrolux fridge relay that allows you to run the fridge on 12v whle traveling .

Behind the dash is a relay by looks of it id say for an alarm maybe?

this is a zig unit mate

[img:150:120]http://www.campingstore.co.uk/images/pr ... 006200.jpg[/img]

Post by **GBHgpJON** » 31 May 2008, 21:25

Cheers mate....

That explains why theres no 12v wiring behind it then...

Got a switch on the dash for the fridge, only live when ignitions on...I guess it would still need a relay

Thick wire from LB goes to the centre of the relay under the dash, which is then feeding the 'extra' fuses.....
Looks like it never had a Zig unit, and the split charger seems to work....
Best leave it all alone!!!!

Cheers all!!

Post by **funbus1** » 01 Jun 2008, 17:12

[IMG]http://i264.photobucket.com/albums/ii20 ... C00985.jpg[/img] GTI Was spot on, my setup is exactly the same as yours, Idont think there was a zig fitted to these. Rick

Post by **GBHgpJON** » 01 Jun 2008, 22:02

Excellent......At least I dont have to worry about sorting out the Zig!!!
Thanks people!!!