Having spent all day trying to get this 1Y engine to say hello. I could not get the pump to bleed. I ended up popping the 1.6d pump on to get her running. What difference will this make to its running? can I leave it there? or should i change to a 1y pump ASAP?
The motor is very lumpy at the moment and will not rev. It will if I turn it off and restart it. So I think its fuel stavation. New filter might sort that me hopes.
That was not the reason the 1Y pump would not prime by the way. I have a bottle of diesel suspended of the fork lift truck to prime that sucker. With no joy at all.
1.6d (na) pump on a 1Y Engine
Moderators: User administrators, Moderators
-
SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
-
Simon Baxter
- Trader
- Posts: 3151
- Joined: 08 Oct 2005, 19:36
- 80-90 Mem No: 1
- Location: Huddersfield, WeYo.
- Contact:
If you could interchange injection pumps like that Bosch would sell 1 injection pump to fit everything.
they don't.
1Y has dual stange injection.
CS doesn't.
I can't check at the moment, but the injectors will have different breaking pressure.
Advance on both engines will be different.
And the main reason is that insdie an injection pump is a thing called a cam plate, that cam plate is set to the engine, not just any engine, that type of engine.
Yes it will go on, yes it will run, no it won't be right.
they don't.
1Y has dual stange injection.
CS doesn't.
I can't check at the moment, but the injectors will have different breaking pressure.
Advance on both engines will be different.
And the main reason is that insdie an injection pump is a thing called a cam plate, that cam plate is set to the engine, not just any engine, that type of engine.
Yes it will go on, yes it will run, no it won't be right.
-
SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
-
SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
-
SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
-
SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
-
SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
safley at home no wand have had my first beer + a glass of red wine. The van is outside. Wey hey !!!!!!!!!!!!
Its just that little bit faster. Ok its not a rocket ship but it is now faster than the lorries. My datum is a stretch of road where she would pull 50mph before she now pulls 60. Which was my goal and this has been achieved.
The pump needs timing correctly as I have just slapped it on using best guess location.
Many many thanks to everyone - especially Simon for the words of wisdom I really needed. Job done and done right now. Thanks Simon for that.
Treve (splendiferous)
Its just that little bit faster. Ok its not a rocket ship but it is now faster than the lorries. My datum is a stretch of road where she would pull 50mph before she now pulls 60. Which was my goal and this has been achieved.
The pump needs timing correctly as I have just slapped it on using best guess location.
Many many thanks to everyone - especially Simon for the words of wisdom I really needed. Job done and done right now. Thanks Simon for that.
Treve (splendiferous)