Tempretures

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
Krisis
Registered user
Posts: 89
Joined: 21 Sep 2007, 13:32
80-90 Mem No: 4213
Location: Derbyshire

Tempretures

Post by Krisis »

Hi ALL
:? Had a scan thru wiki couldn t see anything :?
I am looking for running tempretures oil and water
Mine appears to be a bit on the warm side and the cooling fan sounds pants. I dont think it makes a great deal difference :cry:
TTFN Kris
Its not broke? fiddle with it until it is, then you can fix it
Oh and the name is pronounced CRISIS
CS/JK/CS 1.6 diesel on a DY/DY/DU 4 speed box (3rd engine & gearbox now fitted)
07704 771 285
aka Mr Cortisone

User avatar
Grun
Registered user
Posts: 164
Joined: 11 Oct 2005, 07:57
80-90 Mem No: 1250
Location: Exmoor

Re: Temperatures

Post by Grun »

Krisis,
This forum is just one Krisis after another :wink:
I have a hand written note..... in my manuel...... (he's from Barcelona y'know :) )...... that says....... 87 celsius, which from memory must be the temperature stamped on my thermostat........ so that is a rough guide for starters.
Haynes says thermostat fully open at 105 celsius,
Radiator fan, carburettor engines 1st speed cuts in at 93 to 98 C
cuts out at 88 to 93 C
2nd speed cuts in 99 to 105 C
cuts out at 91 to97 C

Fuel injection engines 1st speed cuts in at 89 to 94 C
cuts out at 81 C
2nd speed cuts in at 95 to 100 C
cuts out at 87 C

Oil, chip oil burners :?: ask me another :roll:

Mike
'Two 'eads is better'n wun even if mine's a sheeps'
Grun
Member Number 1250
D reg 2.1 DJ autosleeper poptop

Locked