Help!!

Post by **Robin!** » 21 Apr 2008, 18:02

I was removing the rear seat belts which were attached to the front seat belt. Well did the bolt just not go and sheer off, now I have no front passenger seat in the T25.

How do I get the remainder of the bolt out.

Post by **R0B** » 21 Apr 2008, 18:15

can you weld anything to whats left.or you may have to drill a hole in whats left.and thread the hole with a left handed thread.insert a bolt and hope to get it off that way....

Post by **Grun** » 21 Apr 2008, 18:46

Like ROB says, and if you are going to use the drill and twist out method,

HERE

is a good write up, and..Here in the wiki

google for 'screw extractors' if you need to find somewhere to buy them.......... we used to call them 'Easyouts'

Mike

Post by **Robin!** » 22 Apr 2008, 17:15

Thanks very much for the useful advice and link.