Heater blower motor defective - advice on removal/repair

Post by **lbyford** » 01 Feb 2006, 13:43

Hello,

Just when I need the blower fan to work it stops. Its not the resistor part as there is nothing on any of the speeds its just the same as if it were off. I am kind of dreading the responses to this as I have heard that the dash needs to be removed in or to get to the blower motor. Hopefully this is not the case.

Any advice greatly received - am feeling the cold at moment as just got back from NZ where it was 25 degrees! brrrrrr

thanks a million

Lee.

Post by **Mocki** » 01 Feb 2006, 14:47

check the switch out first...........

the dash will have to come out if it is the fan.....

Post by **lbyford** » 01 Feb 2006, 15:15

Thanks Mocki. Dash out - such a joy. I will have to work out whats with the switch and see if I am getting power in and out.

cheers

Lee.