viscous coupling

Post by **dave friday** » 13 Mar 2008, 11:38

Hi all can i remove the vc and still use the van?
Ta.

Post by **KarlT** » 13 Mar 2008, 13:27

Post by **KarlT** » 13 Mar 2008, 13:27

Post by **more speed** » 13 Mar 2008, 13:50

Wouldnt it be better to just remove the prop until your ready to replace the vc.

Post by **dave friday** » 13 Mar 2008, 14:22

Thanks,my idea is to have the vc ready for re-furb or exchange, and pop in to one of the people who sell them on my way to the UK.

Post by **toomanytoys** » 13 Mar 2008, 17:33

If I can get a couple of units to put in to my man then drop in.. not far out of the way if you come up past Limoges........

Post by **Russel** » 13 Mar 2008, 18:02

Do not refit the propshaft without the VC in place.U will cause damage to ure front diff assembly.

Post by **HarryMann** » 16 Mar 2008, 01:04

Good point...

So I conclude it must have been done at least once

Post by **Russel** » 16 Mar 2008, 07:38

Not that ime aware off but if you look at the front diff construction it cant do anything else but cause damage.

Post by **HarryMann** » 16 Mar 2008, 10:46

Yes, I suppose in a way that one you helped me replace at CF without much in the way of internal splines was acting a bit like it wasn't being 'very supportive' ?

The vibration driving down there was something to behold