Big Bumper Removal!

Post by **squarepants** » 20 Feb 2008, 22:42

Before I knacker something or injure myself further, how does a front "big bumper" come off? Is it straight forward? Or (as usua) will I find that I need need the dexterity of a piano player as opposed to the "all thumbs and fat fingers" that I have been blessed with.

Post by **ASH** » 20 Feb 2008, 23:06

quite simple really, undo the 2 hex bolts at the front, then there are 2 brackets underneath, at either side, you will need to remove the front to sections of the spoiler aswell if you have one.

If everything comes off ok its only a 5 minute job, I did have some stubborn screws on the spoiler though.

Post by **ASH** » 20 Feb 2008, 23:07

ahh I take it you did mean the front one

Post by **squarepants** » 20 Feb 2008, 23:14

hello Ash. (yep the front0 Thanks for that. My front bolts come out OK, and if it is only the bracket underneath then should be OK. I do have a front spoiler so will remove also. Doesn't solve the fat fingers though!

Thanks again!