Can't find reverse! Help! Was id-10-t error

[lloyd]

Just installed Si's quickshift kit and can't find reverse. 1/2 & 3/4 are fine, but cant get into reverse. Searched wiki and forum and find nothing.

It's wierd... shifter lifts slightly in neutral gate as it reachs 1/2 side from 3/4... and no amount of fiddling around will get it to go farther left in neutral slot for reverse.

Was working fine before installing quickshift so has to be something I did while installing it.

It's an 88, 1.9wbx, 4speed box.

Thanks in advance for your help.

Lloyd

E D I T: In desperation I took it all back apart and guess what??? dropped spacer on top instead of under.. Works great now!
.
Should just delete the post and avoid the embarrassment

[The_blue]

fool

All gears ok now?

Does it make a big difference or do you still turn the radio off hitting 3rd?

[Ian Hulley]

Does it make a big difference or do you still turn the radio off hitting 3rd?

They make a huge difference, on a 5 speed at any rate.

Ian.

[toomanytoys]

You sorted then Lloyd?

All working well now?

I will have shifters available at dubfreeze if anyone else wants one..

[lloyd]

tomanytoys, All sorted.

The_blue, A little egg on my face, but that's all. Yes it makes a big difference and is easy to install. Hardest part is drilling the new depression for retention ring grub screw. I center punched it before drilling.

[1664]

E D I T: In desperation I took it all back apart and guess what??? dropped spacer on top instead of under.. Works great now!
.
Should just delete the post and avoid the embarrassment

What and deprive us of our first 2009 axel-nut nominee? I don't bleedin' think so!!