to save me reinventing the wheel does anyone have the design for adapter plate to mate say a 1.9TD with a diesel bellhousing whilst fitting the engine at it's original car angle rather than JXing it over to 50 degrees ?
Obviously of most use for dokas and sinkas but some others might prefer the advantage of almost upright installation.
Better still anyone supply one complete with studs and bolts ?
Anyone else want them ?
Adapter plate for upright VW inline 4
Moderators: User administrators, Moderators
-
PC52
- Registered user
- Posts: 372
- Joined: 21 Jul 2006, 15:25
- 80-90 Mem No: 3428
- Location: Northants. Syncronaut: 96
Adapter plate for upright VW inline 4
No problem 
You've got a pm.
You've got a pm.
1.9 TDI Syncro Multivan
1.9 TDI Doka project in progress
1.9 TDI Doka project in progress
-
syncroandy
- Trader
- Posts: 1920
- Joined: 18 Oct 2005, 18:15
- 80-90 Mem No: 851
- Location: North Lancs. UK
- Contact:
What, is this secret information or something ?
This is a *forum* for *open discussion*.
Oh yeah, and have a happy new year !
This is a *forum* for *open discussion*.
Oh yeah, and have a happy new year !
Syncrosport (taking a break as of summer 2024)
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
Volkswagen Transporter, reloaded.
252 GC5 EJ25 AAN L90D
-
andysimpson
- Registered user
- Posts: 213
- Joined: 19 Oct 2005, 21:15
- 80-90 Mem No: 0
- Location: Chorley, Lancs
-
syncrodoug
- Registered user
- Posts: 424
- Joined: 10 Oct 2005, 18:51
- 80-90 Mem No: 1053
- Location: Ross-on-Wye
Hi Aidan
Would you be using the starter from the T4 or from the TDI donor vehicle?
My plate mates a 1.9 TDI PD engine (near enough verically) to the T3 transaxle but using the starter from the donor vehicle, in my case a Passat 3B3.
I should be taking engine and transaxle out within a month or so - any good?
Happy New Year...
Doug
Would you be using the starter from the T4 or from the TDI donor vehicle?
My plate mates a 1.9 TDI PD engine (near enough verically) to the T3 transaxle but using the starter from the donor vehicle, in my case a Passat 3B3.
I should be taking engine and transaxle out within a month or so - any good?
Happy New Year...
Doug
80-90: 1053
Syncronauts: 15
T3 Syncro DOKA (makeover nearly finished)
T4 Syncro LWB Panel Van - now departed
T3 Syncro SIKA - deciding whether it's for the chop or worth saving
Syncronauts: 15
T3 Syncro DOKA (makeover nearly finished)
T4 Syncro LWB Panel Van - now departed
T3 Syncro SIKA - deciding whether it's for the chop or worth saving
-
PC52
- Registered user
- Posts: 372
- Joined: 21 Jul 2006, 15:25
- 80-90 Mem No: 3428
- Location: Northants. Syncronaut: 96
Adapter plate for upright VW inline 4
SyncroAndy - Happy New Year, it's already been out for a play.
Doug - Sounds like your making progress. Happy New Year.
Aiden - May be a wise choice, alot of work is involved, but upright is still good
Happy New Year
Doug - Sounds like your making progress. Happy New Year.
Aiden - May be a wise choice, alot of work is involved, but upright is still good
Happy New Year1.9 TDI Syncro Multivan
1.9 TDI Doka project in progress
1.9 TDI Doka project in progress
-
v-lux
- Trader
- Posts: 737
- Joined: 07 Aug 2006, 18:54
- 80-90 Mem No: 2951
- Location: Somerset....yarp!
- Contact:
Aidan, ive got a fair few AAZ bits and bobs left over from my conversion.
I'll have a look at whats there, if any of its of use youre more than welcome to whatever is there. I know for sure that ive got an AAZ inlet manifold, will just have to check its the one you need.
Also got another dead AAZ here that's a friends and i happen to know he's interested in selling bits from it if there any use.
I'll have a look at whats there, if any of its of use youre more than welcome to whatever is there. I know for sure that ive got an AAZ inlet manifold, will just have to check its the one you need.
Also got another dead AAZ here that's a friends and i happen to know he's interested in selling bits from it if there any use.