round lights tiwns

Post by **hercules** » 29 Dec 2007, 23:05

hi iv got round spotlights,iv got a sa grill and spotlights but not sure how they wair up do u have any drawnings how to put them on im very good with me hands just need to no how the wairing goes if you can help me that be nice or could put me on to the right place thanks
chris

Post by **Fox McIntyre** » 30 Dec 2007, 17:21

best way is a relay, but once apona time (Golf and scirocco days) VW saw fit to just run them off the high beam wiring. I don't advise this though. If you need a diagram, I'm drawing one now! xD

Post by **Fox McIntyre** » 30 Dec 2007, 17:40

Ok, here ya go. 12V feed to the relay should ideally come straight off the battery, and be fused as close to the battery as possible, ie, within the first 5CM! Use about a 10 or 15 amp fuse.Use That connects to pin 30.. 87 should connect to your lamps. take a feed off of your high beam circuit if you only want them to operate on high beam. (you could take that from the back of the headlamp if diving into VW wiring is not your forte) and run it to pin 85. 86 should run to earth, and if you want, through a switch first so you can choose weather they come on.
[IMG:150:128]http://img91.imageshack.us/img91/3849/dsc00177fm3.th.jpg[/img]
Any questions?