im but an other two round lights on me van that i got of JK so i have 4 round one my van is 1987 and i been reading up about it and goes on about a Dim-Dip Lamps i seen this behind my RH side headlamp assembly it say disconnected it that about it need some help they other wires they too for light to go in which mit be for the new light if any one got info or pictures on how to wire it up be gart
thanks
again
chris
Fitting uprated headlight kit
Moderators: User administrators, Moderators
-
..lee..
- Registered user
- Posts: 736
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
i would leave the outer lights as they are. if the inner lights you have bought are single beam wire them up just like a pair of spot lamps with a relay.
if they are twin beam lights then run 2 relays and use the dip feed to trigger 1 relay and the main beam feed to trigger the other depends what you are after really
if they are twin beam lights then run 2 relays and use the dip feed to trigger 1 relay and the main beam feed to trigger the other depends what you are after really