Is this a difficult job that requires any special tools? I have some torx keys.
My van is a 1.6 td l/h drive 5speed.
Changing oilseal where driveshaft goes into gearbox.
Moderators: User administrators, Moderators
-
SyncroSam
- Registered user
- Posts: 66
- Joined: 11 Oct 2005, 21:42
- 80-90 Mem No: 1270
- Location: Tamworth
Hi mog,
Welcome to the forum. I replaced one of these a while back. Should be quite straight forward. Can't really remember now to be honest. But think I improvised something using a large socket and long bolt to carefully install the new seal. Don't think i took any pictures because I seem to remember it pissing down at the time. You shouldn't need any special tools.
Cheers,
Sam.
Welcome to the forum. I replaced one of these a while back. Should be quite straight forward. Can't really remember now to be honest. But think I improvised something using a large socket and long bolt to carefully install the new seal. Don't think i took any pictures because I seem to remember it pissing down at the time. You shouldn't need any special tools.
Cheers,
Sam.