Hello,
I have no heating in my 2L Aircooled, there is nothing connecting the ends of the heat exchangers (that point to the front of the bus) to the Y shape pipe that carries the hot air to the front of the bus. There's a gap of about 12" from each exchanger to their respective endof the pipe.
I've tried "botching it" with some alluminium flexipipe and jubilee clips -
but this stunk so bad of burning alluminium that i had to open the window and hence got even colder. So i'm going to try and get the proper part.
does anyone know what do i need to get, is it just a tube? and where can i get it from?
cheers,
James.
Heating tubes, from the heat exchangers
Moderators: User administrators, Moderators
Do you have all these bits? 1 and 8 on the diagram?
http://im1.shutterfly.com/procserv/47b6 ... cOGjJi1cNO
MG
http://im1.shutterfly.com/procserv/47b6 ... cOGjJi1cNO
MG
-
- Registered user
- Posts: 206
- Joined: 10 Oct 2005, 06:53
- 80-90 Mem No: 38
- Location: near Kendal, Cumbria, England
- Contact:
Heat riser
Take a look at JKs listings - the pic shows the control pod as well : Make sure you are sitting down and in a happy place before you look at the prices!!
http://217.29.195.146/FMPro?-db=wproduc ... 373&-find=
http://217.29.195.146/FMPro?-db=wproduc ... 373&-find=
http://217.29.195.146/FMPro?-db=wproduc ... 373&-find=
http://217.29.195.146/FMPro?-db=wproduc ... 373&-find=
Keith
Membership number 38
Membership number 38