Do these storage pockets fit?

Post by **Cruz** » 13 Sep 2007, 11:27

http://shop.justkampers.com/product_inf ... s_id/10455

http://shop.justkampers.com/product_inf ... s_id/10454

JK sell 2 sizes of storage pockets for cab doors. Anyone fit these to their van and of so do they fit the mounting holes already in the door or is it a case of mounting them to the door card?

Cheers

Post by **shepster** » 13 Sep 2007, 12:45

I have the smaller ones in my van, simply screw them onto the doorcard.
The bottom screws will go into the door as well depending where you position them.

Post by **Cruz** » 13 Sep 2007, 13:07

Where abouts did you position them on the door shepster?

Post by **shepster** » 13 Sep 2007, 13:49

Towards the rear of the door so when it's closed the can holder bit is just in front of the seat

You need to offer them up to the door with the door closed so they miss the wheel arch then mark the holes.

Post by **tobzman** » 17 Sep 2007, 16:16

I've got a pair of the longer ones on the front doors and a pair of the shorter ones either side of the bed in the rear.
I removed the door cards and used some short m5 bolts/nuts.

Don't do what I did the first time and fit them too close to the front of the doors otherwise the glovebox wont open when the passengers door is closed