Get it gassed. www.gasure.co.ukhappycamper wrote:
also some hints on getting better fuel economy would be nice
thanks in advance
where does cartb pipe go
Moderators: User administrators, Moderators
Re: where does cartb pipe go
- toomanytoys
- Trader
- Posts: 2872
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
CU?
Cant help on where it should go.. but someone will be along that does..
what mpg are you getting? 17 -24 is "normal" depending on round town on a run..
make sure the carbs are in good condition (most are no now) a rebiuld service is available from a couple of sources.. one of them at Gasure..
ensure the ignition timing is correct and check at full advance what its getting.. a couple or 3 degrees at full advance extra makes a big difference.. (these engines were set to run on 91 grade UL, we only have 95 so you can get a little more advance because of it)
Also the vac advance actually works..
Silly things like tyres pressures and dragging brakes will effect mpg too..
and driving style also...
Cant help on where it should go.. but someone will be along that does..
what mpg are you getting? 17 -24 is "normal" depending on round town on a run..
make sure the carbs are in good condition (most are no now) a rebiuld service is available from a couple of sources.. one of them at Gasure..
ensure the ignition timing is correct and check at full advance what its getting.. a couple or 3 degrees at full advance extra makes a big difference.. (these engines were set to run on 91 grade UL, we only have 95 so you can get a little more advance because of it)
Also the vac advance actually works..
Silly things like tyres pressures and dragging brakes will effect mpg too..
and driving style also...
- The Reverend Pimp Daddy
- Registered user
- Posts: 1149
- Joined: 27 Aug 2006, 10:03
- 80-90 Mem No: 3275
- Location: Cheshire
-
- Registered user
- Posts: 206
- Joined: 10 Oct 2005, 06:53
- 80-90 Mem No: 38
- Location: near Kendal, Cumbria, England
- Contact:
CU stuff
There is some info and a pic of CU pipework in the WIKI:
[img:800:600]https://club8090.co.uk/wiki/images/CU_EngineBay_01.jpg[/img]
Or if you really want to we could meet up and I could show you mine in person - you're not that far away from me...
[img:800:600]https://club8090.co.uk/wiki/images/CU_EngineBay_01.jpg[/img]
Or if you really want to we could meet up and I could show you mine in person - you're not that far away from me...
Keith
Membership number 38
Membership number 38