hi front suspention

Post by **chopperclarksley** » 19 Aug 2007, 12:46

hi there, im a bit concerned about the front suspention of my german imported westie , its about 50mm higher at the front than the back and this is causing the wheels to camber in at the top. has any one come across this before? im wandering if for some reason syncro springs have been put on the front or maybe the rear springs have saged .any ideas/solutions much appretiated.

Post by **toomanytoys** » 19 Aug 2007, 13:04

As a guide, the top wishbones should be near horizontal... well, close if they are tilting down, then its possible someone has fitted stiffer springs... but syncro ones they cannot be.. syncro front springs are shorter.. or you have lowered/broken springs at the back..

Post by **chopperclarksley** » 21 Aug 2007, 15:16

cool cheers i will look at the weekend, any idea about the length of a standard spring?

Post by **T3teedub** » 21 Aug 2007, 16:00

Many of them look higher at the front when parked but with two adults in the front seats they drop a fair bit.