Window Scrapers

[KenH]

Have to fit some new window scrapers, any tips please on fitting!

Thanks

Ken

[skell]

watch out the metal lugs on the underside are sharp! other than that it's easy, I used a bit of superglue to fix the ends to the ajoining bits

[T3teedub]

I did one of mine two years ago but don't remember finding any metal lugs. Later versions may be different ??.
I found the easiest method was to undo and drop the glass into the bottom of the door.

[DJZ]

If your fitting both bottom and top be careful of fitting them right without trying to slide them up tight as the metal strip inside will bend/kink if you try this, been there and got the kink to prove it and at 28 quid a shot for the top one it's going to stay kinked.