LHD Fog light

Post by **shropshirevanman** » 04 May 2007, 13:25

Afternoon!

Ive got a LHD Reimo, with the foglight on the left, for MOT its needs to be on the right, there is a aftermarket fog lamp on the right, but not working, does anyone know how to convert/get a part so you can use the original lamp cluster including the fog light...
many thank

shropsvanman

Post by **colinMSC** » 04 May 2007, 13:47

i think you just fit a bulb to the unit and take a wire across to the o/s

Post by **syncroand101** » 04 May 2007, 13:47

When I have done this in the past easiest thing to do is get in touch with one of the club's breakers and buy an O/S light cluster from a standard UK one, then wire it up as normaly to a Fog switch in the front...

Post by **shropshirevanman** » 04 May 2007, 13:54

thanks for this, will give it a try

cheers

Post by **sevy** » 04 May 2007, 15:07

alternatively you can swap the rear lighting bulb holders over left to right etc ,if you ask for bulb holder make sure you get right one there are two types and three differnt fittings make sure you get right one . i did the later on my lhd riemo took off after market "pooh" thing and wired and rhd fog light in , piece of pi$$ to do and looksneater.

Post by **shropshirevanman** » 04 May 2007, 15:10

Thanks for this sevy, ive got the lamp unit so will crack on with some clever wiring!
shropsvanman

Post by **sevy** » 04 May 2007, 18:52

all i did was in line splice and ran wire across the rear bulkhead and viola , or run a new one from the switch easy

Post by **Westy.Club.Joker** » 04 May 2007, 21:12

Spliced mine across and made a bulb contacter, now got 2 fog lights