anti roll bar

Post by **ginge** » 17 Apr 2007, 15:05

the stay off the anti roll bar sheared the nut is there a way too get the bush etc out or is it best to remove the whole anti roll bar any advice welcome its on a 1980 a/c

Post by **toomanytoys** » 17 Apr 2007, 17:17

If you mean the bottom of the link arm a good tug or leaver will get it out of the rubbers in the arm.. but you will have to take the ARB off in any case to get a new link on with new bushes.. dont be tempted to refit all the old rubber.. get new, the difference is amazing and you road holding will be restored..

Post by **ginge** » 17 Apr 2007, 17:40

right will do that new rubber all round thanks

Post by **The_blue** » 18 Apr 2007, 18:45

http://archive.club8090.co.uk/viewtopic ... highlight=

Asked about fitting a few weeks back

warm the rubbers!! helps no end!

Post by **ginge** » 18 Apr 2007, 19:18

thanks for the info