t25 analogue clock howto - check if working - begging help

General Technical Questions and Answers last answered over 1 year ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics

Moderators: User administrators, Moderators

Locked
acerimmer5
Registered user
Posts: 30
Joined: 05 Oct 2006, 19:46
80-90 Mem No: 2446
Location: Pembroke Dock - S Wales

t25 analogue clock howto - check if working - begging help

Post by acerimmer5 »

hi - hello eveyone - wonder if you can help
i changed over my dashboard for one with a clock - blue circuit board included - i connected it up the clock and everything worked perfectly except that the water temperature light continuiously blinked (water works are all ok) - i then changed the water gauge from my old dash into the new setup which cured the blinking light but now the clock wont work - the circuit board appears ok - can anyone tell me how to power up the clock to test it or any other advice appreciated - regards clockwatcher - john :idea:

User avatar
matt
Registered user
Posts: 7761
Joined: 09 Oct 2005, 18:37
80-90 Mem No: 397
Location: #Derbados

Post by matt »

maybe the clock was frekled before you got it, did you see it ticking ?
:)

acerimmer5
Registered user
Posts: 30
Joined: 05 Oct 2006, 19:46
80-90 Mem No: 2446
Location: Pembroke Dock - S Wales

clock help reply

Post by acerimmer5 »

yes the clock has been working flawlessly for the past week - not lost a minute - i know its a connection problem probably from the clip that you connect to the blue circuit diagram but there are so many wires - i need to put 12v across the clock but not sure where u earth to - any help appreciated - john

Locked