sliding door bearings

Post by **ally** » 01 Mar 2007, 12:34

ok so i got my van started again, and now the sliding door is broken!

I took of the panel and both the horizontal bearings have broken off - i have one here sheared in half. Where can i get a replacement bearing from?

Thanks

Ally

Post by **ally** » 02 Mar 2007, 19:33

hello ally

yes, go to a bearing shop and buy ones the same size...

Post by **ally** » 02 Mar 2007, 19:34

ok ally i did that and now it works...

cheers

ally

Post by **kevtherev** » 02 Mar 2007, 19:46

are you insane?.....help is at hand

don't let the van get to you.....it's tin and rubber

Post by **Rozzo** » 02 Mar 2007, 20:12

kevtherev wrote: don't let the van get to you.....it's tin and rubber

only had one a short while and even i know thats not true

Post by **kevtherev** » 03 Mar 2007, 01:14

It isn't? .....oh no, so it's an entity then!

Post by **ally** » 03 Mar 2007, 02:15

i am going insane..

If the van wasnt an entity why as soon as one thing is fixed does another break, sureley it knows.

Post by **stuckin88** » 03 Mar 2007, 08:32

Ally-go to your nearest VW van centre--the parts are probably still listed by VW-take your VIN number to input in their computer--if you cant do the work yerself & you are nr Colchester go to J Austin VW on the roundabout at Marks Tey tel 01206211483

Post by **kevtherev** » 03 Mar 2007, 15:51

ally wrote: why as soon as one thing is fixed does another break,

all that is explained in here