im in the final stages of my engine rebuild but am having a nightmare finding the correct electrical wiring for the carbs. i did take pics before the strip down but the wiring was in a state with connectors loose all over the place. any pics or sketches would be much appreciated.
(2ltr CU, twin 32-34 PDSIT carbs, standard ign system with stock dual vac dizzy)
solex 32-34 pdsit wiring help
Moderators: User administrators, Moderators
-
cumbriankeith
- Registered user
- Posts: 206
- Joined: 10 Oct 2005, 06:53
- 80-90 Mem No: 38
- Location: near Kendal, Cumbria, England
- Contact:
Basically all the electrical terminals on the chokes and solenoids need a 12v supply when the ignition is on - I suggest you keep playing around with the little looms till it all sort of sits right.
The first time I took mine apart I labelled all the leads as I took them off. The pics of my engine bay won't show you enough detail for those leads - otherwise I'd suggest looking at it.
The first time I took mine apart I labelled all the leads as I took them off. The pics of my engine bay won't show you enough detail for those leads - otherwise I'd suggest looking at it.
Keith
Membership number 38
Membership number 38