yes bell housing will fit ok but the syncro bell housing has breather pipes, depends on whether you will be take it through deep water.
You will need diesel input shaft, nothing special about syncro one.
Diesel Conversion
Moderators: User administrators, Moderators
-
andysimpson
- Registered user
- Posts: 213
- Joined: 19 Oct 2005, 21:15
- 80-90 Mem No: 0
- Location: Chorley, Lancs
-
andysimpson
- Registered user
- Posts: 213
- Joined: 19 Oct 2005, 21:15
- 80-90 Mem No: 0
- Location: Chorley, Lancs
Yes thats right. I have not looked at making a 2wd into a 4wd bell housing, the breather pipes are aprox 40mm. The bell housing simply bolts on, once removed there is a circlip to remove and then input shaft can be removed.Newbie wrote:Thanks
The non-syncro ones have just breather holes, while the syncro's have pipes leading to a place that would presumeably not get submerged, right? So could one just add pipes in a similar manner to the holes on the diesel one?
Also, what does changing the bellhousing and input shaft entail as far as transmission work?
Nate