Fer, Fer, Fer, Fer, Ferkin Fanbelts,,,,,,

[Fritz]

OK then in our case they are known as drive belts rather than anything more specific, and for this lecture I am refering to the belt fitted to the 1.9 DG petrol engine (1985/6)

I have found a spare belt in the cubby hole just inside the rear hatch which has the overall length of 1075mm, I find this wont fit my set up unless I fully remove the adjusting bolt on the adjusting bracket.

I have since tried to get hold of another from a local factors, who also tell me the one listed is the one with the 1075mm length , this is not what I want.

JK also suggests the one for my vehicle should be the 1075mm, but I disagree the one I need is a 1080mm, which I have since found to be the correct one for the job,,,,,

Anyone else noticed this error,,,,,,,,,,,,,,where can I get a 1080 from ?

Regards

Fritz,,,,,,,,,,,,

[R0B]

hey up mate.have you tried your local partco...

[Simon Baxter]

2 sizes used.

10x1075
10x1100

It's one, or the other.

[Fritz]

OK then it is not often I am right but it appears I am wrong again.









1100 mm it will be,,,,,,,,,,,

Regards

Fritz,,,,,,,,