door seal

General Technical Questions and Answers last answered over 1 year ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics

Moderators: User administrators, Moderators

Locked
ally
Registered user
Posts: 17
Joined: 23 Jan 2006, 21:43
80-90 Mem No: 0
Location: Essex
Contact:

door seal

Post by ally »

hey

How do i stop the whistling from my door seal at high speads?

Do i have to spend £30 on a new seal from just kampers?

User avatar
Westy.Club.Joker
Registered user
Posts: 484
Joined: 18 Sep 2006, 19:37
80-90 Mem No: 2863
Location: Sunny Lancs. 1988 1.6TD Westfalia Club Joker pop-top

Post by Westy.Club.Joker »

Which door, what type of `van? There is a section in Bentley manual for VW techs, to stop whistlin` seals. I`ll look up the "cure" if you tell me where it`s coming from :)

ally
Registered user
Posts: 17
Joined: 23 Jan 2006, 21:43
80-90 Mem No: 0
Location: Essex
Contact:

Post by ally »

drivers door...86 Caravelle.

Please dont pick on me, im not a car person!

User avatar
Westy.Club.Joker
Registered user
Posts: 484
Joined: 18 Sep 2006, 19:37
80-90 Mem No: 2863
Location: Sunny Lancs. 1988 1.6TD Westfalia Club Joker pop-top

Post by Westy.Club.Joker »

Note that you have an air duct through the bottom of the doors, that takes air from the blower into the rear cabin, you may / should have a small blue coloured slider on the inside rear of the front doors, that opens and closes the outlet from the door. Westy camper has one door like this, the other has a different arrangment on the sliding door side (offside as Westy is left-hand drive)

OK, here it is from Bentley:

check and adjust the fit of the door first, panel gap all round.
check fit of door seal at area over the window guide, the area shown is the top 6" before the door angles down to the quarter light, and the 6" down the door frame over the quarter light.

check for secure fit of quarter light, if you have opening q/lights

check overlap of the window guide seal and the window channel, top corner area where the window winds up to, the corners each side.

door retaining metal strap, should have a rubber seal round it.

door seal where the speaker cables etc come through from the body to the door interior, foam rubber seal there.

window winder seal to the door card.

remove door card and check the plastic film cover for holes.

Enjoy :)

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Post by kevtherev »

excellent !



...or encourage the seal to play the traditional circus hooters...Image
AGG 2.0L 8V. (Golf GTi MkIII)

Locked