Alloy wheels

All things round and their alignment to your direction of travel

Moderators: Moderators, User administrators

Locked
jimmcgregor
Posts: 1
Joined: 17 Feb 2011, 20:42

Alloy wheels

Post by jimmcgregor »

Are audi alloy wheels ok to fit on my bus, How much modifying does it require to get them on? The pcd is right but dont know much about offset and bore size, Can anyone help with this?

scoobydrew
Posts: 343
Joined: 08 Oct 2005, 11:38
80-90 Mem No: 1046
Location: Staffs

Re: Alloy wheels

Post by scoobydrew »

Hi,
Try looking here.

http://wiki.club8090.co.uk/index.php/Wh ... ive_wheels

The WIKI at the top of the forum page is a good knowledge for all stuff.

Andy
Andy
Member 1046
Need more time.

Cruz
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Re: Alloy wheels

Post by Cruz »

jimmcgregor wrote: How much modifying does it require to get them on?
useable offset on the wheels

Correct wheel pcd

Correct bolt hole diameter

Correct wheel centre bore

Spacers to correct the offset and clear any suspension issues

Longer bolts/studs (studs need pressing out of the rear hubs and new ones pressing in)

Tapered or radius seat nuts/bolts

Correct sized tyres to keep the rolling radius the same as well as adequately rated tyres

etc etc etc

Or spend ££££££ of the ugly-ish original spec multivan alloys

Locked