Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

Post Reply
Posts: 33
Joined: 16 Oct 2005, 13:00
80-90 Mem No: 1838
Location: newquay,cornwall


Post by glennyboy2 »

What’s the best system when fitting new side panels with regard to the seams. I was thinking bare metal, etch primer , plug weld, inject seams with rust preventer (RC2000), then seam sealer and finally filler on the external seam

What’s the best way of applying seam sealer and in what size gap?


member 1838

Caroline,86 Leisuredrive Hitop, 1Y diesel

Posts: 60
Joined: 29 Apr 2018, 19:16
80-90 Mem No: 16836
Location: West Midlands

Re: Seams

Post by Gordo89 »

i did the following.
- cleaned metal with preparation wheel.
- cleaned bare metal with panel wipe
- applied weld through primer (upol copper)
- plug welded

i still need to epoxy and seam seal

Post Reply