Club 80-90 Forums

Perfect, thanks for that really appreciated!

Picture attached to help!

Looking to go into paint shortly

Hi All, I'm trying to figure out what window seal sizes I need for a South African 1991 combi. Taking very rough measurements the middle window from seal edge to edge is around 110cm by 45cm. I'm guessing these are the larger South African window variants? If so does anyone know where to get new sea...

Just kampers have them at £30 each, little cheaper then brickwerks.

https://www.justkampers.com/255971916-c ... -1992.html

I think I might have a couple of used good condition ones otherwise.

Cheers, Colin

Thanks all, makes sense to me. The arm rests which came with the seats have an identical silhouette to the t4 arm rests I've bought, just 2cm wider.

No part identification numbers apparent. Only thing I could find on the tag was V11/HR2. DGK881375

Thanks, Colin

Hi all, I imported a t25 syncro from South Africa a while ago and looking to get some new seat covers. I'm trying to figure out what seats I've got though.. I thought t4 as they have the t4 headrests, but looking at the arm rests they look to be the wider T3 arm rests.. (I did buy some more t4 arm r...

Thanks All, 

Will have a mess about with it and see if I can get it working then post the results!

Cheers,
Colin

Took a few pics to try and figure out what the connections are, this is what I've assumed / got so far: Brown / Green - Cab Door Switches (Checked) Brown / Yellow - Sliding Door Switch (Assumed, definitely one of the door switches - my multi-meter doesn't reach that far) Brown / White - Boot Door Sw...

Thanks muchly, I can work off that for now. I've seen a few cheap dimmer units on ebay - as its original it'd be good to leave it in and get it working (if possible). I'll see if I can take a picture over the next few days when I get 5.

Cheers!

It's a late 1991 South African import - when you close the doors it's meant to keep the lights on and slowly dim them over ten seconds. Next time I have 5 mins I can take a pic if helpful.

Hi all, Wondering if anyone has a wiring diagram for the interior light dimmer relay (looks like these were pretty rare on the later models)? Someone's cut a white and a red cable coming off the relay plug, can't for the life for me find a diagram to work off (will assume the red wire is an easy fix...

Hi Rob, yes please! I'm pm over my details shortly.

Pictures as promised for anyone else who's interested in hunting for future reference.

Cheers, Colin

I'll have a play later and see if I can take the motor apart, from looking at it though I think it's rusted solid. The worm drive comes off easily enough though.

Ahh, I've seen a few of the slightly smaller ones, the motor body length is around 45mm from memory - one size up (which seem impossible to find unless it's got a special name lost to history and time)

Hard to tell from the picture but it's a squished oval motor. I've had a look online but can't find any with the right dimensions - will post more info tomorrow. Again, I have a work around which I'm happy to use, but would be good to get them working again if possible.

Thanks, Colin