Club 80-90 Forums

i sell these at work the raid product is realy good there is a rage one out there but is very poor quality after a couple of months the rage 1 gets wobbly

the roof change over can be done in a weekend with two people on the job the last 1 we done was changed from a fibreglass high top to a left hand drive roof with the sunroof above the loading bay it was a bit of work to do but is worthwhile

rjes clutch ??? please tell aint heard of this ??

should take 3 half 4 hours

i run 255 35 18 the slider just hits the tyre an no more
[sorry should have added my wheel et it is 20 on the rear]

personal experience i wouldnt use any white box /g-max/jamex/avo suspension kits i have spent over 1500.00 quid in suspension and none of them come close to being a good kit the adjustment on the avo stuff is horrid if adjusted to stop bounce the ride is horrid if adjusted to make ride smooth the va...

i have mate who has just stripped a steyr puch ex army vehicle it had a 2.5 vw Aircooled engine fitted i could find out more details if it would be any good

i will second the time bomb theory i have a tweeked tdi running a Aircooled box ive already cracked a head on 1 engine and destroyed a piston in another. engine number 3 will be getting an easyer life untill i can afford the proper box from aidan talbot

i get mine from me can get most wheels just let me know what style you like and a size an i can qoute you happy :):)

shockingly enough i think these would fit i had et 35 9 1/2 19"s on my van for a while and the arches ate them up no probs a dont have aclue on tyres if you want i could try a et 30 22" wheel from my work on with a realy low tyre an let you know

i am curently running on et 35 wheels that are 9 " wide with 245 40 18 tyres on with a 18mm spacer and my door just touches the tyre. although my current slider is rotten at the bottom and lyes a bit further in than normal. im awaiting delivery of 2 10" rears et 15 im hopeing these bolt on...

ive been using phos/bronze for a good few years as uprated spigot shaft bearings and have never had any drying up problems or screeching noises according to the engineer i use this material is self lubricateing

i make exhausts and have made 4 different styles/types for my tdi and found out that the first 1 . i made it in 2 1/4 " tube takein the same route as origional tube and used a upgraded silencer same legnth as stock but 6" diameter with a 2 1/4" bore outhrough . this 1 held the van bac...

ive listed a picture of my van in the garage section if you wana see how it looks the rears look ok in picture but they only nines the tens are off till it gets a lick of paint an a replacement engine fitted (as ive cracked the head) p.s. lookin for input on wheels what do you think of them ????

in my opinion wheell et is dependant on what your looking for .. if going for euro look like me you will need et 30 -9" front and et 15-10" rear this is bassed on 18" wheels with 225 40 18 tyres and 245 40 18 rears you can use et 30 all round but it looks well betters with a 20mm hub ...