Club 80-90 Forums

hi thanks for the replies ill wait until it needs an oil change then as the oil filter has to come off to get to the nut its not losing a lot of oil glad to have it back on the road just got a new mot on her off to vw action next weekend

yeah can see it weeping when running and everything else has been changed oil cooler seals oil filter housing gasket rear main seal distributor seal all done

got a slight oil leak from case bolt on 2.0 cu type 4 engine its a 13mm nut just behind the oil filter how can i fix the leak would i be ok to undo the nut and put some sealant under the washer

sweet ill buy some of that then

will thus be ok http://www.ebay.co.uk/itm/1-5mm-12v-24v ... lzVFj1-T6g" onclick="window.open(this.href);return false;

thanks bigherb wheres the best place to get automotive wire from

what grade/amp is the grey and yellow wire that feeds the power to the fog light switch from the headlight switch mine decided to fry itself today whilst checking my van over before i took it for mot needless to say i packed myself a little luckily i manage to switch off and disconnect battery befor...

hello sarran1955 thanks for your speedy reply decided to clean the bottom of the engine at the weekend also will clean the goop off manifolds and put some new nuts on there too will post some pictures of the head with rocker box off it looks like old oil as i have got fresh oil in there i have fixed...

i did have a leak there but fixed it i'm leaning towards it being residue from previous leaks its too dark to be new oil might get under there with a steam cleaner at the weekend see if it goes away

can some one help please ive had flywheel seal done oil cooler seals done push rod tubes done and now ive found this leak seams to be all over cylinder 3 and 4 is there anything above there that could be leaking or is it the cylinders themselves is on a 2.0 cu type 4 engine http://i1184.photobucket....

thanks for the reply thats my Easter week project any tips on making sure it seals and seats properly.

wheres the best place to buy a rear main seal and flywheel o ring for my 2.0 cu type 4 engine and do i need to check end float.

Anything else i should do with the fan housing off should i do fan hub seal do justkampers sell them

thanks for the replies guys has anyone on here done them with engine in im going to try take fan housing off

anyone know where to buy good oil cooler seals or if these are any good http://www.justkampers.com/review/product/list/id/347/" onclick="window.open(this.href);return false;