Club 80-90 Forums

That's brilliant thankyou

Hi I think i have seen someone put up a guide on a distributor and vacuum advance rebuild on a DG but I can't seem to find it?
or anyone know of a good gide to rebuild my distributor amd fit my new vacuum advance

Thanks

It looks like there is already one either side of the plastic gasket ?

Hello I'm having problem with sealing my carburettor to the Internet manifold I have bought the new 6mm plastic gasket but was wondering if I can use gasket sealant/maker aswell ? Or is this a bad decision

It's comming off the rad return pipe so it's not an atual pipe on its own I had a quick look in the manual and it looks like it might be a pipe that goes to an auto gearbox fluid cooler but I don't have an auto so there may have been a possible pipe change at some point or long ago maybe the van had...

Hello was put the engin back in the van today and found a pipe resting on top of the gear box that previous owner had blocked off with a bolt I located it to the back of a plastic manifold pic below was wondering were its ment to connect to So the plastic part just behind the back of the bay on driv...

Evening I bought this window of eBay and I'm going to be fitting it to my van as it will be a better option than the sliding window on the cooker side however when I was going to buy a new seal there is two different types my van is the flush seal type and the window that I have got off of eBay is t...

Thanks for the advice I thought it may be common as have seen a few pictures of them with pitting

So it maybe best not to get the head skimmed although the skimming will be free of a mate with a machine shop

I'll try get some pictures up of the pitting over the weekend


Thanks

Hello I have the heads off and seem to have some small pitting on the head face so was after getting them skimmed was wondering if it was possible on my petrol 1.9 DG , as have seen a few threads saying it's not possible on the Diesel engines Also I am replacing the valves as I have a valve with a s...